skip to Main Content

Biodegradable disinfectant

BIODEGRADABLE DISINFECTANT was developed to combine the power of peroxide with biodegradable emulsifying detergents to provide fantastic cleaning and deodorizing results. BIODEGRADABLE DISINFECTANT uses the proven power of peroxide to brighten and deodorize a variety of surfaces. It can be used for canvas cleaning and to remove moss. Economical in use, its unique blend of detergents penetrates and emulsifies grease, grime and dirt.

PRODUCT SKU: A100160-4cs
  • Fully biodegradable
  • Canadian Food Inspection Agency (CFIA) approved
  • As a disinfectant, kills 99.9% of bacteria, fungi and viruses
  • As a sanitizer, kills 99.9% of bacteria

Specifications

Physical Data

Liquid

Appearance

Colourless

Color

Citrus

Scent

5.5-6.5

pH

Description

BIODEGRADABLE DISINFECTANT was developed to combine the power of peroxide with biodegradable emulsifying detergents to provide fantastic cleaning and deodorizing results.

Uses

Daily damp mop cleaning: Use 0.5-1 oz. per US gallon of cold water (4-8ml/litre) (1:128-1:256) Note: BacStop mops are not recommended for use with this product General cleaning & deodorizing: Use 2 oz. per US gallon of cold water (16ml/litre) (1:64) Cleaning & whitening ceiling tile & stippled ceilings: Mist on at 16 oz. per US gallon of cold water (125ml/litre) (1:8). Be sure to cover everything below ceiling. For general sanitizing of food contact hard surfaces: 1100ppm active HYDROGEN PEROXIDE. Dilute 1 part BIODEGRADABLE DISINFECTANT with 60 parts water. (16.5ml/litre) (2.1 fl oz. per US gallon).Ensure surfaces are cleaned (ie. organic matter and debris are removed) prior to sanitizing. A suitable concentration/ppm testing method must be available and used regularly to ensure correct sanitizer levels. Sanitized surface must be air-dried. All food should be removed or covered prior to use and food contact surfaces are to be thoroughly rinsed with potable water so there will be no contamination of food as a result of its use. General Disinfection: Apply 75ml of BIODEGRADABLE DISINFECTANT per litre of water to hard, inanimate, non-porous surfaces, thoroughly wetting surfaces as recommended and required, with a cloth, mop, sponge or sprayer. Let surface remain wet for at least 10 minutes then rinse. Let the surface air dry. BIODEGRADABLE DISINFECTANT is not to be used as a sterilant/high level disinfectant on any surface or instrument that: (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. The product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.

Resources

Product Information Sheets

Safety Data Sheets

It's time to come clean.

We can take it. We're always looking for ways to improve, so please share your experience with us.

0 Reviews for Biodegradable disinfectant

Back To Top